# The Apereo Foundation licenses this file to you under the Apache License,
# Version 2.0 (the "License"); you may not use this file except in
# compliance with the License. You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#
# See the License for the specific language governing permissions and
# limitations under the License.
# 
#############################################################################

# Application settings

# Use the following property to set the login page when user types '/UniTime' 
tmtbl.login_url=login.jsp

# Use the following property to configure maximum number of failed login attempts
#   before the user is locked out of the system for a period of time
#   defaults to 7 if not set
#tmtbl.login.max.failed.attempts=7

# Use the following property to configure the number of minutes a user will be locked
#   out of the system if they exceed the maximum number of failed login attempts
#   defaults to 15 if not set
#tmtbl.login.failed.lockout.minutes=15

# Use the following property to configure the number of milliseconds to delay responding
#   to a user with an unable to log in error if they have exceeded their maximum number
#   of failed login attempts by more than 3
#   defaults to 15000
#tmtbl.login.failed.delay.milliseconds=15000

# Headers and Footers
#tmtbl.header.external=custom/header.jsp
#tmtbl.footer.external=custom/footer.jsp

# System message displayed to all users when the log on
tmtbl.system_message=

# Reload this file on the fly if modified when deployed to the app server
# Should probably be set to false in production but useful during development
tmtbl.properties.dynamic_reload=false

# Set the periodicity (in milliseconds) for checking if property files have changed
tmtbl.properties.dynamic_reload_interval=15000

#Enable "local" option in the solver host selection
tmtbl.solver.local.enabled=true

#Minimum amount of available memory (in megabytes) needed to be able to start additional solver instance
#If there is not enough memory on any of the registered solver servers, the following exception is thrown:
#	"Not enough resources to create a solver instance, please try again later."
tmtbl.solver.mem_limit=200

# Logging properties
log4j.logger.org.hibernate.cfg=WARN
log4j.logger.org.hibernate.connection.DriverManagerConnectionProvider=WARN
log4j.logger.org.hibernate.util.JDBCExceptionReporter=ERROR
log4j.logger.org.hibernate.cache.EhCacheProvider=ERROR
log4j.logger.org.hibernate.cache.CacheFactory=ERROR
log4j.logger.org.hibernate.engine.internal.StatefulPersistenceContext=ERROR
log4j.logger.org.hibernate.ps.PreparedStatementCache=WARN
log4j.logger.org.hibernate.engine.transaction.internal.jta.JtaTransaction=ERROR
log4j.logger.net.sf.ehcache.distribution.jgroups.JGroupsCacheReceiver=ERROR
log4j.logger.net.sf.ehcache.distribution.jgroups.JGroupsBootstrapManager=WARN
log4j.logger.org.hibernate.cache.ehcache.AbstractEhcacheRegionFactory=ERROR

log4j.appender.stdout=org.apache.log4j.ConsoleAppender
log4j.appender.stdout.Target=System.out
log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
log4j.appender.stdout.layout.ConversionPattern=[%-d{MM/dd/yy HH:mm:ss}] %-6p %c{1} -> %m%n

log4j.appender.unitime=org.apache.log4j.DailyRollingFileAppender
log4j.appender.unitime.File=${catalina.base}/logs/unitime.log
log4j.appender.unitime.DatePattern='.'yyyy-MM-dd
log4j.appender.unitime.Append=true
log4j.appender.unitime.layout=org.apache.log4j.PatternLayout
log4j.appender.unitime.layout.ConversionPattern=[%-d{MM/dd/yy HH:mm:ss}] %-6p %c{1} -> %m%n

log4j.rootLogger=INFO, stdout, unitime

#Show SQL commands
#log4j.logger.org.hibernate.SQL=DEBUG

#Hide warnings by ActionMapping
log4j.logger.org.apache.struts.action.ActionMapping=ERROR

# Email settings (UniTime 3.2+)
# Common settings
mail.smtp.host=127.0.0.1
mail.smtp.port=25
# If SMTP authentication is needed
# mail.smtp.user=
# mail.smtp.password=
# Enable SSL if needed. Other mail.smtp.ssl properties may need to be set
# (see http://java.sun.com/products/javamail/javadocs/com/sun/mail/smtp/package-summary.html)
# mail.smtp.ssl.enable=true
# Sender address
unitime.email.sender=noreply@unitime.org
unitime.email.sender.name=UniTime Application
# Reply to address
unitime.email.replyto=support@unitime.org
unitime.email.replyto.name=UniTime Support

# Email notifications
unitime.email.notif=demo@unitime.org
unitime.email.notif.name=UniTime Demo
# Send solution commit / uncommit notifications
unitime.email.notif.commit=false
# Send error reports
unitime.email.notif.error=false
# Data import/export emails
unitime.email.notif.data=false

# Email inquires (Contact us page)
# If not defined, unitime.email.notif is used instead.admin
unitime.email.inquiry=demo@unitime.org
unitime.email.inquiry.name=UniTime Demo
# For users without email, an email is constructed as login name + the following suffix
unitime.email.inquiry.suffix=@unitime.org
# Also send an autoreply message back to the user (if false, the user is CC-ed in the original message)
# This is handy when sending emails to users can fail (e.g., because of an invalid email address)
unitime.email.inquiry.autoreply=false

# Email confirmations
# Enable event confirmations
unitime.email.confirm.event=true

#Integration with Wiki
tmtbl.wiki.help=true
#tmtbl.wiki.url=http://help45.unitime.org/
#tmtbl.help.root=http://help45.unitime.org/Timetabling
tmtbl.help.manual.events=https://docs.google.com/document/d/1bDzKBMEKOFYN_aBwzA6E4PAsBOGV7Tx-A3i_kuMae6U
tmtbl.help.manual.events_admin=https://docs.google.com/document/d/1Aye5LrLiAcTBR7aNOJO6laYg7-eEDlkfd5s0EW3jFZ4
tmtbl.help.manual.input_data=https://docs.google.com/document/d/1rjS_6ebwegSTcN5Iw57qui5CHG8_6TWnk8MCwBwAt58
tmtbl.help.manual.solver=https://docs.google.com/document/d/1NZmKnmrjM2Tqg7dO18cWcMIe_GrtilQtKw6d1WGWBtY
tmtbl.help.manual.instructorScheduling=https://docs.google.com/document/d/1JksFtB9ecIoKpuyY0SDdl3dKnATe8UQAPKlGfBWi2JU
tmtbl.help.manual.administration=https://docs.google.com/document/d/1iuj9NwrqkiVeJvKn1Sd41qqaVEJGwO79y1KZo1mtwuw
tmtbl.help.manual.schedulingAssistant=https://docs.google.com/document/d/1QTCKwLhU62yGtr6XlW_XM68q3hgohxLpwWXdyajr30g
tmtbl.help.manual.schedulingDashboard=https://docs.google.com/document/d/1ap13URaw7UVT0FN9NZtgSROEKoS-V7S1uq0214Sh43M
tmtbl.help.manual.other=https://docs.google.com/document/d/1eE4UR_9xUa8xqGsbUgTFQAO6NXmcmicn2U6E1XtmFkc
#tmtbl.help.faq=http://help45.unitime.org/Frequently_Asked_Questions
#tmtbl.help.tricks=http://help45.unitime.org/Tips_and_Tricks
tmtbl.help.release_notes=help/Release-Notes.xml
#HTTPS version of help pages
#  Enable when UniTime is access via https to prevent mixed content warnings in IE.
tmtbl.wiki.url=https://help48.unitime.org/
tmtbl.help.root=https://help48.unitime.org/timetabling
tmtbl.help.faq=https://help48.unitime.org/frequently-asked-questions
tmtbl.help.tricks=https://help48.unitime.org/tips-and-tricks

#Override default Scheduling Subpart Editing Preference
tmtbl.subpart.credit.editable=true

#Enable these properties on a test server
#tmtbl.global.warn=This is a test version of the Timetabling application, no data entered here will be used in production.
#tmtbl.custom.css=styles/test.css
#tmtbl.title=Timetabling TEST

#Course Number pattern (3 numbers followed by an optional letter) 
tmtbl.courseNumber.pattern=^[0-9][0-9][0-9]([A-Za-z]){0,1}$
tmtbl.courseNumber.patternInfo=Course Number must have 3 numbers followed by an optional letter (e.g. 214, 342X)
# If true, course numbers are automatically converted to upper case
tmtbl.courseNumber.upperCase=true

#Non University Location name pattern
#tmtbl.nonUniversityLocation.pattern=^[A-Za-z0-9][A-Za-z0-9 &/-]{0,19}$
#tmtbl.nonUniversityLocation.patternInfo=Non University Location name must start with a letter or number followed by up to 19 other letters, numbers, dashes, ampersands or spaces.

# Default decimal format of the room area 
unitime.room.area.units.format=#,##0.##

#Course Number must be unique within a subject area
#  If you set this to false you must removed the unique key UK_COURSE_OFFERING_SUBJ_CRS and its corresponding index
#  If this value is not set it defaults to true
tmtbl.courseNumber.unique=true

#Manager External Id Lookup
#Must implement the interface org.unitime.timetable.interfaces.ExternalUidLookup
tmtbl.manager.external_id.lookup.enabled=false
tmtbl.manager.external_id.lookup.class=

#Instructor External Id Lookup
#Must implement the interface org.unitime.timetable.interfaces.ExternalUidLookup
tmtbl.instructor.external_id.lookup.enabled=false
tmtbl.instructor.external_id.lookup.class=

#Contact information (Contact Us page)
tmtbl.contact.address=
tmtbl.contact.phone=
tmtbl.contact.office_hours=
tmtbl.contact.email=timetabling@universty.edu
tmtbl.contact.email_mailto=timetabling@universty.edu?subject=TIMETABLING: <add subject here&gt

#Custom properties (loaded on top of application properties)
tmtbl.custom.properties=custom.properties

#Enable export of PDF Worksheet files on Instructional Offerings page 
tmtbl.pdf.worksheet=true
#tmtbl.pdf.worksheet.author=UniTime 3.1
#tmtbl.pdf.worksheet.title=PDF WORKSHEET

#If the following property is defined and set to true, last used academic session is 
#automatically selected for an authenticated user (if it is still available for the user).
tmtbl.keeplastused.session=false

#Generated exam name
# Basic codes
# s ... subject area
# c ... course number
# i ... itype abbv
# n ... section number
# x ... configuration name
# Additional codes
# d ... department abbv
# D ... department code
# a ... class suffix (div-sec number)
# y ... itype suffix (a, b etc.)
# e ... class extended id
# f ... course extended id
# o ... offering extended id
# t ... exam type suffix (tmtbl.exam.name.type.Final and tmtbl.exam.name.type.Midterm)
# I ... itype code
# p ... itype parent abbv
# P ... itype parent code
# _ ... space
tmtbl.exam.name.maxLength=100
tmtbl.exam.name.Course=%s %c
tmtbl.exam.name.Offering=%s %c
tmtbl.exam.name.Config=%s %c [%x]
tmtbl.exam.name.Class=%s %c %i %n
tmtbl.exam.name.suffix=
tmtbl.exam.name.sameSubject.Course=; %c
tmtbl.exam.name.sameSubject.Offering=; %c
tmtbl.exam.name.sameSubject.Config=; %c [%x]
tmtbl.exam.name.sameSubject.Class=; %c %i %n
tmtbl.exam.name.sameCourse.Config=, [%x]
tmtbl.exam.name.sameCourse.Class=, %i %n
tmtbl.exam.name.sameSubpart.Class=, %n
tmtbl.exam.name.diffSubject.separator=;%_
tmtbl.exam.name.type.Final=Final
tmtbl.exam.name.type.Midterm=Midterm

#Room availability -- by default, use the included event management system
tmtbl.room.availability.class=org.unitime.timetable.util.DefaultRoomAvailabilityService

# Examination Timetabling: Consider direct student and instructor conflicts with other events 
#  (that is class events, course events with required attendance)
#  for final examination problem
tmtbl.exam.eventConflicts.final=true
#  final midterm examination problem
tmtbl.exam.eventConflicts.midterm=true
#  Required minimal travel time between class event and an exam (in the number of 5-minute long time slots)
tmtbl.exam.eventConflicts.travelTime.classEvent=6
#  Required minimal travel time between course event and an exam (in the number of 5-minute long time slots)
tmtbl.exam.eventConflicts.travelTime.courseEvent=0

# Examination Timetabling: Automatically create strongly preferred same room constraint between exams of the same owner(s)
#  (while examination data are loaded into the solver)
#  for final examination problem
tmtbl.exam.sameRoom.final=false
#  final midterm examination problem
tmtbl.exam.sameRoom.midterm=true

# Examnation Timetabling: Automatically create following preferences
#  (while an exam is being saved into the database)
# 
# For an exam that is attached to an evening class -> put period preference on a period that overlaps 
# in time and day of week with the class (if not preference is set by the user)
# 
# Final exams --> require appropriate period (overlapping day of week and time) for an evening class 
#   (evening class is a class that takes place after 6pm, defined by firstEveningPeriod -- number of 5-minute long time slots from midnight)
#   (preference: R for required, -2 strongly preferred, -1 preferred, 0 rule disabled, 1 discouraged, 2 strongly discouraged, P prohibited)   
#tmtbl.exam.defaultPrefs.final.eveningClasses.pref=R
#tmtbl.exam.defaultPrefs.final.eveningClasses.firstEveningPeriod=216
#
# Final exams --> rule disabled
tmtbl.exam.defaultPrefs.final.eveningClasses.pref=0
tmtbl.exam.defaultPrefs.final.eveningClasses.firstEveningPeriod=216
#
# Evening exams --> rule disabled
tmtbl.exam.defaultPrefs.midterm.eveningClasses.pref=0
tmtbl.exam.defaultPrefs.midterm.eveningClasses.firstEveningPeriod=216
#
# For an exam that is attached to a class -> put room preference on a room (if it allows exams) of the class
# Final exams -> strongly prefer original room (room where the class is placed) 
#tmtbl.exam.defaultPrefs.final.originalRoom.pref=-2
# Final exams -> rule disabled
tmtbl.exam.defaultPrefs.final.originalRoom.pref=0
# Midterm exams -> rule disabled
tmtbl.exam.defaultPrefs.midterm.originalRoom.pref=0
#
# For an exam that is attached to a class -> put building preference on a room of the class
# Final exams -> prefer original building (of the room where the class is placed) 
#tmtbl.exam.defaultPrefs.final.originalBuilding.pref=-1
# Final exams -> rule disabled
tmtbl.exam.defaultPrefs.final.originalBuilding.pref=0
# Midterm exams -> rule disabled
tmtbl.exam.defaultPrefs.midterm.originalBuilding.pref=0
# If the rule is enabled, set whether it is to be applied only when a class is in a room that allows exams.
#tmtbl.exam.defaultPrefs.final.originalBuilding.onlyForExaminationRooms=false
#tmtbl.exam.defaultPrefs.midterm.originalBuilding.onlyForExaminationRooms=false



# Exams default start and stop offsets - This is to be used to reserve time for
#   students entering the exam room before the exam begins and time for students
#   to leave the exam after the exam has finished. The start offset must be a
#   positive number that is not greater than the number of minutes in the exam
#   period.  The stop offset must be a number whose value is
#   greater than the number of minutes in the exam period.  By default the start time displayed
#   for the exam with be the start time of the exam period plus the start offset
#   and the end time displayed will be the end time of the exam period minus the
#   stop offset.  If no offset is defined then 0 is assumed. e.g.
#tmtbl.exam.defaultStartOffset.midterm=15
#tmtbl.exam.defaultStopOffset.midterm=15
#tmtbl.exam.defaultStartOffset.final=20
#tmtbl.exam.defaultStopOffset.final=0

#Trim leading zeros from student and staff external ids when loading from xml
# This is useful if the data loads have ids with leading zeros and external lookup systems ignore the leading zeros
# In this case the trim leading zeros should be set to true, by default it is false.
#tmtbl.data.exchange.trim.externalId=false

#If you are using UniTime in conjunction with an external system that identifies classes differently than UniTime
#   you can create a java class that implements the ExternalClassNameHelperInterface interface to create custom
#   naming for the class that is displayed in places such as the personal exam schedule and personal class 
#   schedule for students.  If this is not set org.unitime.timetable.util.DefaultExternalClassNameHelper is used
#tmtbl.class.naming.helper=org.unitime.timetable.util.DefaultExternalClassNameHelper

# Disclaimer to be added at the bottom of every page (in HTML format).
#tmtbl.page.disclaimer=Thanks for using UniTime, the best software ever made for University Timetabling. If you have any questions contact us at support@unitime.org.

# Room coordinations
# The following property sets the ellipsoid that is used to compute distances.
# Values:
#    LEGACY ... Euclidean metric (1 unit equals to 10 meters)
#    WGS84 ... WGS-84 (GPS, a = 6378137 m, b = 6356752.3142 m)
#    GRS80 ... GRS-80 (a = 6378137 m, b = 6356752.3141 m)
#    Airy1830 ... Airy (1830) (a = 6377563.396 m, b = 6356256.909 m)
#    Intl1924 ... Int'l 1924 (a = 6378388 m, b = 6356911.946 m)
#    Clarke1880 ... Clarke (1880) (a = 6378249.145 m, b = 6356514.86955 m)
#    GRS67 ... GRS-67 (a = 6378160 m, b = 6356774.719 m)
unitime.distance.ellipsoid=WGS84
# Minimap (to be displayed if set)
#   Strings %x and %y are replaced by the room's coordinates
#   String %n is replaced by the room name
#   String %i is replaced by the room external id 
unitime.minimap.url=maps?center=%x,%y&zoom=16&size=600x400
# Minimap to be used in location's tooltip
unitime.minimap.hint=maps?center=%x,%y&zoom=15&size=300x200
# QR Code example:
# unitime.minimap.hint=http://chart.apis.google.com/chart?cht=qr&chs=200x200&chl=%n+(%x,%y)+%i
# Use Google maps to enter room / building coordinates
unitime.coordinates.googlemap=false

# Application Configuration page
# Only properties matching the following regular expression are displayed 
tmtbl.appConfig.pattern=^(tmtbl|unitime)\\..*$


# Default application menu style
# Values
#  Static On Top ... Horizontal menu bar on the top of the page (takes 100% width of the page, does not move with the page)
#  Dynamic On Top ... Horizontal menu bar on the top of the page (takes 100% width of the client window, moves with the page as it is scrolled)
#  Tree On Side ... Tree on the left side of the page content (moves with the page, resembles the UniTime 3.1 menu the most)
#  Stack On Side ... Tree on the left side of the page content, but the first level of the tree is a StackPanel (only one top level item can be opened at a time)
# If manager setting for this property is created, each user (timetable manager) can change his/her menu style.
unitime.menu.style=Dynamic On Top

# Solution passivation time
# Number of minutes after which an inactive solution can be passivated to disk to save memory
# Passivation is disabled if set to zero, default is 30 minutes
unitime.solver.passivation.time=30

# For various PDF exports, if you need other fonts than the ones bundled in the iText library (e.g., because of their poor unicode support), 
# set the following unitime.pdf.font properties. The fonts will be embedded in the exported PDF.
#
# Here are some tested examples (please check that you have the fonts installed before uncommenting of the appropriate section):
# Windows 7 Arial and Courier Fonts
#unitime.pdf.font=c:\\Windows\\Fonts\\arial.ttf
#unitime.pdf.font.italic=c:\\Windows\\Fonts\\ariali.ttf
#unitime.pdf.font.bold=c:\\Windows\\Fonts\\arialbd.ttf
#unitime.pdf.font.bolditalic=c:\\Windows\\Fonts\\arialbi.ttf
#unitime.pdf.font.fixed=c:\\Windows\\Fonts\\cour.ttf
# Mac OS X Arial and Courier New Fonts
#unitime.pdf.font=/Library/Fonts/Arial.ttf
#unitime.pdf.font.italic=/Library/Fonts/Arial Italic.ttf
#unitime.pdf.font.bold=/Library/Fonts/Arial Bold.ttf
#unitime.pdf.font.bolditalic=/Library/Fonts/Arial Bold Italic.ttf
#unitime.pdf.font.fixed=/Library/Fonts/Courier New.ttf
# Linux DejaVu Fonts (see http://dejavu-fonts.org/)
#unitime.pdf.font=/usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf
#unitime.pdf.font.bold=/usr/share/fonts/truetype/ttf-dejavu/DejaVuSans-Bold.ttf
#unitime.pdf.font.bolditalic=/usr/share/fonts/truetype/ttf-dejavu/DejaVuSans-BoldOblique.ttf
#unitime.pdf.font.italic=/usr/share/fonts/truetype/ttf-dejavu/DejaVuSans-Oblique.ttf
#unitime.pdf.font.fixed=/usr/share/fonts/truetype/ttf-dejavu/DejaVuSansMono.ttf
#unitime.pdf.fontsize.small=8
#unitime.pdf.fontsize.normal=10
#unitime.pdf.fontsize.fixed=8
# Linux Bitstream Vera Fonts (http://www-old.gnome.org/fonts/)
#unitime.pdf.font=/usr/share/fonts/truetype/ttf-bitstream-vera/Vera.ttf
#unitime.pdf.font.bold=/usr/share/fonts/truetype/ttf-bitstream-vera/VeraBd.ttf
#unitime.pdf.font.bolditalic=/usr/share/fonts/truetype/ttf-bitstream-vera/VeraBI.ttf
#unitime.pdf.font.italic=/usr/share/fonts/truetype/ttf-bitstream-vera/VeraIt.ttf
#unitime.pdf.font.fixed=/usr/share/fonts/truetype/ttf-bitstream-vera/VeraMono.ttf
#unitime.pdf.fontsize.small=8
#unitime.pdf.fontsize.normal=10
#unitime.pdf.fontsize.fixed=8


unitime.authentication.ldap.url=ldap://null
unitime.authentication.ldap.user-dn-pattern=uid={0},ou=authenticate
unitime.authentication.ldap.group-search-base=ou=authorize
unitime.authentication.ldap.group-role-attribute=uid
unitime.authentication.ldap.group-search-filter=uid\={1}
unitime.authentication.ldap.group-convert-to-uppercase=false

# Translation between LDAP uid and UniTime's external user id
#tmtbl.externalUid.translation=org.unitime.timetable.spring.ldap.SpringLdapExternalUidTranslation
unitime.authentication.ldap.identify=uid={0},ou=identify

# External user lookup using LDAP
#tmtbl.manager.external_id.lookup.class=org.unitime.timetable.spring.ldap.SpringLdapExternalUidLookup
#tmtbl.manager.external_id.lookup.enabled=true
#tmtbl.instructor.external_id.lookup.class=org.unitime.timetable.spring.ldap.SpringLdapExternalUidLookup
#tmtbl.instructor.external_id.lookup.enabled=true

# Enable UniTime to receive replies on event confirmation emails
# If a reply message is received, a new note is added to the event's notes and an updated confirmation is sent to all contacts of the event.
# If the reply message contains an attachment, it is also added to the new event note and included in the new confirmation email.
unitime.email.inbound.enabled=false
# IMAP connection for receiving replies (using SSL, see the following example for Gmail)
# If username contains a whole email address, use %40 instead of @ in the username
unitime.email.inbound.uri=imaps://[username]:[password]@imap.gmail.com/INBOX
# Reply-to address for event confirmation emails
unitime.email.inbound.address=[username]@gmail.com
# Reply-to address name for event confirmation emails
unitime.email.inbound.name=UniTime Events


# JGroups configuration defaults
unitime.enrollment.jgroups.config=sectioning-jgroups-tcp.xml
unitime.hibernate.jgroups.config=hibernate-jgroups-tcp.xml
unitime.solver.jgroups.config=solver-jgroups-tcp.xml